HomeStore

FORD RACING 460 CUBIC INCH 575 HP BOSS CRATE ENGINE # M-6007-Z460FFT

Product image 1
1 / 2

FORD RACING 460 CUBIC INCH 575 HP BOSS CRATE ENGINE # M-6007-Z460FFT

Ford Performance has taken its Boss Block to the max with the biggest small block Windsor crate engine ever - the Z460. With 575 horsepower and 575 Lb. Ft. of torque, Z460 packs a pump gas fueled punch that works well on the street and on the track.

The foundation of Z460 is the legendary Ford Performance Boss block topped off with high port/high flow Z-Heads. Premium components from the best aftermarket companies are used throughout the engine, like a SCAT forged steel crankshaft, SCAT forged H-beam connecting rods, forged Mahle pistons and Clevite bearings. And every Ford Performance Z460 engine is hand assembled in the U.S. with performance clearances.

575 Horsepower @ 5,500 RPM

575 lb.-ft. Torque @ 4,700 RPM

  • Engine type: 351 based small block Ford
  • Displacement (cu in): 460
  • Bore x stroke (in): 4.150" bore x 4.250" stroke
  • Block: Boss 351 9.5" deck
  • Crankshaft: SCAT Forged Steel
  • Connecting Rods: SCAT forged steel H-beam 6.125-inch length connecting rods
  • Pistons: Forged Mahle w/ floating wrist pin
  • Camshaft type: Hydraulic Roller
  • Camshaft lift (in): .594"/.618"
  • Camshaft Duration (@.050 in): 2420/2480
  • Cylinder Heads: Ford Performance M-6049-Z304DA Aluminum "Z" Cylinder Heads
  • Valve size (in): 2.02 intake 1.60 exhaust
  • Compression ratio: 10.0:1 (nominal)
  • Rocker arm ratio: 1.65:1
  • Vibration Damper: Ford Performance M-6316-D302 SFI Approved
  • Valve Covers: Ford Performance 302-137 cast aluminum gray crinkle
  • Oil Pan: Steel with deep front (9 quart) or rear sump (7 quart) pan with louvered windage tray and crankshaft scraper - 9 quart capacity -M-6675-FT351 front sump
  • Water pump: Ford Performance M-8501-G351 included long type - standard rotation
  • Includes Ford Performance M-9439-A50 intake manifold gaskets
  • Distributor: not included. Steel distributor gear required.
  • Required fuel: Premium Unleaded
  • Ignition timing: 320 at 4,000 RPM
  • Maximum recommended rpm: 5,600 RPM
  • Balanced: Internal use neutral balance flywheel
  • Recommended intake: Edelbrock PN 2924 Super Victor (not included)
  • New block, oil and water pump, performance oil pan and high-performance harmonic balancer
  • Engine power ratings achieved with Edelbrock Super Victor intake, Holley 850 CFM carburetor, long tube headers.

Ford Performance has taken its Boss Block to the max with the biggest small block Windsor crate engine ever - the Z460. With 575 horsepower and 575 Lb. Ft. of torque, Z460 packs a pump gas fueled punch that works well on the street and on the track.

The foundation of Z460 is the legendary Ford Performance Boss block topped off with high port/high flow Z-Heads. Premium components from the best aftermarket companies are used throughout the engine, like a SCAT forged steel crankshaft, SCAT forged H-beam connecting rods, forged Mahle pistons and Clevite bearings. And every Ford Performance Z460 engine is hand assembled in the U.S. with performance clearances.

575 Horsepower @ 5,500 RPM

575 lb.-ft. Torque @ 4,700 RPM

  • Engine type: 351 based small block Ford
  • Displacement (cu in): 460
  • Bore x stroke (in): 4.150" bore x 4.250" stroke
  • Block: Boss 351 9.5" deck
  • Crankshaft: SCAT Forged Steel
  • Connecting Rods: SCAT forged steel H-beam 6.125-inch length connecting rods
  • Pistons: Forged Mahle w/ floating wrist pin
  • Camshaft type: Hydraulic Roller
  • Camshaft lift (in): .594"/.618"
  • Camshaft Duration (@.050 in): 2420/2480
  • Cylinder Heads: Ford Performance M-6049-Z304DA Aluminum "Z" Cylinder Heads
  • Valve size (in): 2.02 intake 1.60 exhaust
  • Compression ratio: 10.0:1 (nominal)
  • Rocker arm ratio: 1.65:1
  • Vibration Damper: Ford Performance M-6316-D302 SFI Approved
  • Valve Covers: Ford Performance 302-137 cast aluminum gray crinkle
  • Oil Pan: Steel with deep front (9 quart) or rear sump (7 quart) pan with louvered windage tray and crankshaft scraper - 9 quart capacity -M-6675-FT351 front sump
  • Water pump: Ford Performance M-8501-G351 included long type - standard rotation
  • Includes Ford Performance M-9439-A50 intake manifold gaskets
  • Distributor: not included. Steel distributor gear required.
  • Required fuel: Premium Unleaded
  • Ignition timing: 320 at 4,000 RPM
  • Maximum recommended rpm: 5,600 RPM
  • Balanced: Internal use neutral balance flywheel
  • Recommended intake: Edelbrock PN 2924 Super Victor (not included)
  • New block, oil and water pump, performance oil pan and high-performance harmonic balancer
  • Engine power ratings achieved with Edelbrock Super Victor intake, Holley 850 CFM carburetor, long tube headers.
$6,346.07

Original: $18,131.62

-65%
FORD RACING 460 CUBIC INCH 575 HP BOSS CRATE ENGINE # M-6007-Z460FFT

$18,131.62

$6,346.07

Description

Ford Performance has taken its Boss Block to the max with the biggest small block Windsor crate engine ever - the Z460. With 575 horsepower and 575 Lb. Ft. of torque, Z460 packs a pump gas fueled punch that works well on the street and on the track.

The foundation of Z460 is the legendary Ford Performance Boss block topped off with high port/high flow Z-Heads. Premium components from the best aftermarket companies are used throughout the engine, like a SCAT forged steel crankshaft, SCAT forged H-beam connecting rods, forged Mahle pistons and Clevite bearings. And every Ford Performance Z460 engine is hand assembled in the U.S. with performance clearances.

575 Horsepower @ 5,500 RPM

575 lb.-ft. Torque @ 4,700 RPM

  • Engine type: 351 based small block Ford
  • Displacement (cu in): 460
  • Bore x stroke (in): 4.150" bore x 4.250" stroke
  • Block: Boss 351 9.5" deck
  • Crankshaft: SCAT Forged Steel
  • Connecting Rods: SCAT forged steel H-beam 6.125-inch length connecting rods
  • Pistons: Forged Mahle w/ floating wrist pin
  • Camshaft type: Hydraulic Roller
  • Camshaft lift (in): .594"/.618"
  • Camshaft Duration (@.050 in): 2420/2480
  • Cylinder Heads: Ford Performance M-6049-Z304DA Aluminum "Z" Cylinder Heads
  • Valve size (in): 2.02 intake 1.60 exhaust
  • Compression ratio: 10.0:1 (nominal)
  • Rocker arm ratio: 1.65:1
  • Vibration Damper: Ford Performance M-6316-D302 SFI Approved
  • Valve Covers: Ford Performance 302-137 cast aluminum gray crinkle
  • Oil Pan: Steel with deep front (9 quart) or rear sump (7 quart) pan with louvered windage tray and crankshaft scraper - 9 quart capacity -M-6675-FT351 front sump
  • Water pump: Ford Performance M-8501-G351 included long type - standard rotation
  • Includes Ford Performance M-9439-A50 intake manifold gaskets
  • Distributor: not included. Steel distributor gear required.
  • Required fuel: Premium Unleaded
  • Ignition timing: 320 at 4,000 RPM
  • Maximum recommended rpm: 5,600 RPM
  • Balanced: Internal use neutral balance flywheel
  • Recommended intake: Edelbrock PN 2924 Super Victor (not included)
  • New block, oil and water pump, performance oil pan and high-performance harmonic balancer
  • Engine power ratings achieved with Edelbrock Super Victor intake, Holley 850 CFM carburetor, long tube headers.
FORD RACING 460 CUBIC INCH 575 HP BOSS CRATE ENGINE # M-6007-Z460FFT | Eagle Auto Parts