HomeStore

BluePrint Engines Chev 632 Big Block 815HP Stroker Crate Engine # PS6320CTC-WD

Product image 1
1 / 7
+2

BluePrint Engines Chev 632 Big Block 815HP Stroker Crate Engine # PS6320CTC-WD

632 CI ProSeries Stroker Crate Engine | Big Block GM Style | 10.3L | Base Dressed Longblock with Carburetor

WARRANTY ENGINE FITTED WITH PROFORM ROCKER COVERS & BREATHERS.

ISSUE WITH ENGINE WAS CONTAMINATES IN THE OILING SYSTEM.

FULL REBUILD , HPC COATED STANDARD PISTONS , HEADS DISASSEMBLED AND FULLY RE-ASSEMBLED . NEW BEARINGS ,
NEW GASKETS , BLOCK SURFACED , CRANKSHAFT LINISH , RACE HONE WITH TORQUE PLATE , HEADS BEAD BLASTED , VALVE SEATS REFACED AND CUT.
DYNO TEST , TUNE ENGINE.

ENGINE REBUILT BY DANDY ENGINES. 12 MONTH WARRANY ON ENGINE

THIS ENGINE HAS BEEN REDUCED FROM $36,750 TO $32,750

  • HP & Torque: 815 HP / 775 FT LBS
    Compression Ratio: 11.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

BLOCK:

  • NEW BluePrint Cast Iron Block
  • Manufactured and Machined in the USA!
  • 4-Bolt Main
  • 4.600" Bore
  • 1-Piece Rear Main Seal
  • Mech fuel pump provision: Yes
  • Tall Deck (Cyl Deck is Approx .400 taller / wider than oem block)

    ROTATING ASSEMBLY:

    • New BluePrint Forged Crankshaft
      4.750" Stroke
      Forged H-beam 6.635" connecting rods
      Forged Pistons
      Internal

    CYLINDER HEADS:

    • BluePrint Aluminum Cylinder Heads -PS8012
    • 119cc chamber
    • 2.30" intake/1.88" exhaust valves
    • 358cc intake/125cc exhaust runners
    • Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
    • Must verify clearance of exhaust,shift linkage, steering components etc. before ordering.

    CAM SPECS:

    • Cam Type: Roller
      .698 / .698 Lift
      272 / 282 duration @ .050 - 110 degree LSA

      ALSO INCLUDES:

      • Valve covers, oil pan and timing cover
        Harmonic balancer
      • 1250 CFM Carburetor
      • Intake Manifold
      • Pro Billet Distributor
        Dyno test results shipped with engine

      632 CI ProSeries Stroker Crate Engine | Big Block GM Style | 10.3L | Base Dressed Longblock with Carburetor

      WARRANTY ENGINE FITTED WITH PROFORM ROCKER COVERS & BREATHERS.

      ISSUE WITH ENGINE WAS CONTAMINATES IN THE OILING SYSTEM.

      FULL REBUILD , HPC COATED STANDARD PISTONS , HEADS DISASSEMBLED AND FULLY RE-ASSEMBLED . NEW BEARINGS ,
      NEW GASKETS , BLOCK SURFACED , CRANKSHAFT LINISH , RACE HONE WITH TORQUE PLATE , HEADS BEAD BLASTED , VALVE SEATS REFACED AND CUT.
      DYNO TEST , TUNE ENGINE.

      ENGINE REBUILT BY DANDY ENGINES. 12 MONTH WARRANY ON ENGINE

      THIS ENGINE HAS BEEN REDUCED FROM $36,750 TO $32,750

      • HP & Torque: 815 HP / 775 FT LBS
        Compression Ratio: 11.0:1
        Aluminum Heads
        Hydraulic Roller Cam
        Forged Crank
        Forged Pistons

      BLOCK:

      • NEW BluePrint Cast Iron Block
      • Manufactured and Machined in the USA!
      • 4-Bolt Main
      • 4.600" Bore
      • 1-Piece Rear Main Seal
      • Mech fuel pump provision: Yes
      • Tall Deck (Cyl Deck is Approx .400 taller / wider than oem block)

        ROTATING ASSEMBLY:

        • New BluePrint Forged Crankshaft
          4.750" Stroke
          Forged H-beam 6.635" connecting rods
          Forged Pistons
          Internal

        CYLINDER HEADS:

        • BluePrint Aluminum Cylinder Heads -PS8012
        • 119cc chamber
        • 2.30" intake/1.88" exhaust valves
        • 358cc intake/125cc exhaust runners
        • Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
        • Must verify clearance of exhaust,shift linkage, steering components etc. before ordering.

        CAM SPECS:

        • Cam Type: Roller
          .698 / .698 Lift
          272 / 282 duration @ .050 - 110 degree LSA

          ALSO INCLUDES:

          • Valve covers, oil pan and timing cover
            Harmonic balancer
          • 1250 CFM Carburetor
          • Intake Manifold
          • Pro Billet Distributor
            Dyno test results shipped with engine
          $23,752.43
          BluePrint Engines Chev 632 Big Block 815HP Stroker Crate Engine # PS6320CTC-WD—
          $23,752.43

          Description

          632 CI ProSeries Stroker Crate Engine | Big Block GM Style | 10.3L | Base Dressed Longblock with Carburetor

          WARRANTY ENGINE FITTED WITH PROFORM ROCKER COVERS & BREATHERS.

          ISSUE WITH ENGINE WAS CONTAMINATES IN THE OILING SYSTEM.

          FULL REBUILD , HPC COATED STANDARD PISTONS , HEADS DISASSEMBLED AND FULLY RE-ASSEMBLED . NEW BEARINGS ,
          NEW GASKETS , BLOCK SURFACED , CRANKSHAFT LINISH , RACE HONE WITH TORQUE PLATE , HEADS BEAD BLASTED , VALVE SEATS REFACED AND CUT.
          DYNO TEST , TUNE ENGINE.

          ENGINE REBUILT BY DANDY ENGINES. 12 MONTH WARRANY ON ENGINE

          THIS ENGINE HAS BEEN REDUCED FROM $36,750 TO $32,750

          • HP & Torque: 815 HP / 775 FT LBS
            Compression Ratio: 11.0:1
            Aluminum Heads
            Hydraulic Roller Cam
            Forged Crank
            Forged Pistons

          BLOCK:

          • NEW BluePrint Cast Iron Block
          • Manufactured and Machined in the USA!
          • 4-Bolt Main
          • 4.600" Bore
          • 1-Piece Rear Main Seal
          • Mech fuel pump provision: Yes
          • Tall Deck (Cyl Deck is Approx .400 taller / wider than oem block)

            ROTATING ASSEMBLY:

            • New BluePrint Forged Crankshaft
              4.750" Stroke
              Forged H-beam 6.635" connecting rods
              Forged Pistons
              Internal

            CYLINDER HEADS:

            • BluePrint Aluminum Cylinder Heads -PS8012
            • 119cc chamber
            • 2.30" intake/1.88" exhaust valves
            • 358cc intake/125cc exhaust runners
            • Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
            • Must verify clearance of exhaust,shift linkage, steering components etc. before ordering.

            CAM SPECS:

            • Cam Type: Roller
              .698 / .698 Lift
              272 / 282 duration @ .050 - 110 degree LSA

              ALSO INCLUDES:

              • Valve covers, oil pan and timing cover
                Harmonic balancer
              • 1250 CFM Carburetor
              • Intake Manifold
              • Pro Billet Distributor
                Dyno test results shipped with engine
              BluePrint Engines Chev 632 Big Block 815HP Stroker Crate Engine # PS6320CTC-WD | Eagle Auto Parts